Tuesday, November 3, 2009

Trick Or Treat Bag

Ok, so I know that this blog is all but dead. I just don't have the time to blog like I used to. But I have a craft project that is so easy and fun, I just had to share.

We took the Munchkin trick-or-treating this year, and I wanted to make him a bag for the occasion.



You will need:

--primary (outside) fabric
--liner fabric
--applique fabric
--fusible web
--iron
--sewing machine/needle/thread/other sewing basics

How much of each fabric you need depends on the size of the bag you want to make. I bought a yard each of the orange fabric and the black skeleton liner fabric, and was able to make three bags, measuring about 9 1/2" x 11 1/2."

1. Determine how big you want you bag to be. I decided that 10" x 12" was about the right size and the numbers were easy to work with. Cut primary and liner fabrics to measure the width of your bag (plus ~1/2" for seam allowance) x two-times the length of the bag (plus ~1/2" for seam allowance).

Here are my primary and liner fabric, cut to 10" x 24" and then folded in half to measure 10" x 12"

2. Fold fabric in half lengthwise, right sides facing, and sew along the outside edges of the fabric, leaving 1/4" to 1/2" for seam. When sewing the liner, leave a hole at the bottom corner of one side (In the picture below, you can see the orange fabric sticking out of the hole at the bottom of the liner).


3. Turn liner right side out (leave outside of bag inside out). It might help to iron the liner at this point to crease the bottom and flatten the seams. Place the liner inside the bag, so that the right side of the liner (outside) faces the right side of the bag (inside).



4. When placing liner fabric inside of bag, line the seams up as best you can (This is where ironing the lining fabric really pays off. When it's flat and well shaped, it's much easier to slip it into the bag). Sew lining to bag along the top of the bag, leaving 1/4" to 1/2" seam allowance.

5. This is where the magic happens. Reach into the bag and pull the bag and liner out through the hole in the bottom of the liner.



6. When you are done turning the bag inside out, sew up the hole in the bottom of the lining, then insert the lining back into the bag. Iron the bag to flatten seams and shape the bag. You now have a lined bag.


7. At this point, use the fusible web to applique whatever design you like. I chose this happy Jack O' Lantern Face. (Follow instructions on whichever fusible web product you are using to complete this step).


8. Now it's time to make the handles. 1) Determine how long you want your handles to be. Cut the fabric equal to the length of the fabric x 4 times the width. My handles were 14" long by 1" wide. 2) Fold strip of fabric in half, and iron to press crease along center of the fabric. 3) Unfold fabric, and then fold edges of fabric into center and press creases into fabric. 4) With edges folded in, fold fabric along center crease, and you have your handle!



9. Determine handle placement and pin handles to bag. Sew handles onto bag using a criss cross pattern to add extra stability. Don't forget to keep the back of the bag away from the sewing machine! You don't want to sew the bag together when sewing the handles one. We'll just pretend I didn't learn that one the hard way ;-)


Now your Trick-or-Treat bag is finished. Hand it off to your favorite little Munchkin and enjoy your Halloween!

(Yes, I know this post is too late to actually make one for this Halloween. But the beauty of this bag is that it can be ANY kind of bag...a craft tote, a Christmas bag, a small diaper bag, whatever you want. So have fun with it. I know I did!)